3 更多
6 更多
Lot incorporates material from endangered species … 显示更多
百达翡丽,罕有,铂金自动上弦教堂声三问万年历腕表,配月相,24小时及闰年显示,型号5074,约2012年制,附额外底盖、盒子及外包装

REF. 5074, CIRCA 2012

细节
百达翡丽,罕有,铂金自动上弦教堂声三问万年历腕表,配月相,24小时及闰年显示,型号5074,约2012年制,附额外底盖、盒子及外包装
机芯: 自动上弦
表盘: 黑色
表径: 42毫米
附件: 铂金百达翡丽针扣、额外底盖、电动转表盒及外包装
备注: 初登拍场
百达翡丽
注意事项
Lot incorporates material from endangered species that is not for sale and is shown for display purposes only. The endangered species strap shown with the Lot is for display purposes only and is not for sale.Upon sale, the watch will not be supplied to a buyer outside Hong Kong with any watch strap.

荣誉呈献

Alexandre Bigler
Alexandre Bigler SVP, Head of Watches, Asia Pacific

拍品专文

Reference 5074
Reference 5074 is one of the most technologically complex, aesthetically appealing and hard-to-find modern Patek Philippe wristwatches. In production from 2001 to 2005 in yellow gold, since 2005 in pink gold and in platinum since 2009.

Reference 5074 can be considered one of the most striking stylistic exercises by Patek Philippe. It seamlessly blends design traits inherited from vintage horology with modern solutions. The final result is breath-taking.

The dial with its three subsidiary counters and no windows obviously looks back at the timeless and supremely balanced design of perpetual calendars of the past century, such as reference 1518 and 2499. The lugs as well are unmistakably inspired by the celebrated lug design of reference 2499, with the outer top edge of each sculpted with a subtle groove. The blank sloped and stepped bezel, instead, is a trait typical of modern horology, as is its impressive diameter of 42 mm.

It incorporates the legendary "Cathedral" repeating mechanism, consisting of a high-tone and a low-tone gong. When the repeating is activated, first the number of hours is stroke by means of one of the two hammers on the low-tone gong, followed by the quarter hours with double strikes on both the low-tone and the high-tone gong, and finally the number of minutes which have elapsed since the last quarter-hour with one hammer on the high-tone gong.

The length of the gong in a standard repeating mechanism corresponds to almost precisely one turn in the movement whereas those of the "Cathedral" mechanism exceed the case circumference by at least one and a half, even two turns. Consequently, a much richer and fuller timbre is achieved, resembling the chime of the bells of a cathedral.

更多来自 时代巨铸及臻极系列 (第一部份)

查看全部
查看全部